Travel legs (flights, trains, drives, and ferries) form the backbone of most trips. The same four paths add any of them: forward a confirmation, upload a document, hand it to Connie in chat, or enter the details manually. Flights are the only mode with live status tracking at the moment; other modes sit on the timeline statically until status feeds for them ship.
Four ways to add a leg
However a file reaches her (forwarded to the personal address, uploaded, sent through the share sheet, or attached in her chat), Connie reports back in the same one conversation once she has read it. She shows what she added and where it went — the expense, the leg, the trip — as cards you can tap straight through to. When she couldn't make sense of a file, she shows the file itself instead, so it's still one tap away and nothing is lost. If something in it was not clear, she asks about it there.
She can also see whatever is waiting on you — an expense matched from a receipt, a change a booking wants to make to a leg you edited, a friend request — and offer to deal with it. She never acts on her own: she puts it in front of you with a button, so you can confirm in the conversation instead of going to your notifications.
Your personal forwarding address is <your-token>@constellations.li. It's also on the profile page under Forwarding addresses, where a tap copies it.
Anything forwarded there from your account email (or from a verified sender alias) is read and added to your trips automatically.
Filled in for you
Adding a leg by hand takes three short steps: what kind of travel, the few details everything else depends on, then a summary of what will be added. Create adds it as it stands; Change details opens the full form (the seat, a note, anything else). When something is still missing, like a flight the airline's schedule didn't find, the last step is the full form instead. Each field starts with the most likely answer, worked out from the trip, with an amber sparkle and a line saying where it came from. Change anything that's wrong, or tap Create to accept it all.
- Where from fills the first gap in the route: where a leg lands that the next one doesn't leave from (landing in Auckland with the next flight from Kuala Lumpur, say). With no gap, it's where the last leg arrives, though not for another flight once the trip is already back home. On a trip with nothing on it yet, it's where you'll be when the trip starts, or your home airport for a flight.
- When is once you've had time to get clear of the leg before: off the plane, through passport control after an international flight, and out to the next ride, or time to connect to another flight. On an empty trip, 9am on its first day.
- Where to for a drive or train is the next stay on the trip, or home once the last stay is behind you.
- Time zones follow the places, not the device you're adding from.
- For a flight, the airline's schedule is checked as soon as the flight number and day are in, and fills in the airports and times (marked with a blue sparkle). If it doesn't fly on the day that was guessed, the next day is checked, since a late arrival often means flying on after midnight. If it doesn't fly on a day you picked, the nearest days it does, before and after, are offered to choose from.
Planning a trip for someone else, the guesses are about them: their legs, their home, where they'll be.
The mode of the leg before has a dashed outline in the first step, as a reminder; the choice is always yours.
Finding places
The place search lists the closest matches first, measured from the other end of the leg, with how far away each one is. The last line, Search everywhere, looks the words up on the map instead, finding addresses, hotels, venues and landmarks that aren't stations or airports. A place found that way keeps its exact spot, so drive times, the map and the weather all work for it.
Working out times for drives
When you add a drive or a bus journey yourself, pick where it starts and ends from the suggestions (or from Search everywhere), then choose how its times are set. When you add one, the journey is worked out as soon as both ends and a time are in, so the other time is ready on the next step:
- Manual (the default): both times stay exactly as you set them.
- Leave at: set when you leave, and the arrival is worked out from the journey.
- Arrive by: set when you need to arrive, and the departure is worked out so you get there on time.
Times are worked out allowing for the traffic usually expected at that time of day, without stops or breaks. As it gets close to leaving (about two hours, 45 minutes and 15 minutes before), the journey is checked again with live traffic and the worked-out time moves if it has changed. With Arrive by, the reminders before you leave move with it. With Leave at, if the arrival is now a quarter of an hour or more later, anyone on or following the journey gets a signal, and anyone picking you up gets an updated time to leave.
Changing the time you set moves the other one with it. Changing the worked-out time yourself switches back to Manual.
Checking in and sharing progress on a leg
Flights track themselves. Every other leg (drives, buses, trains and ferries) has one set of buttons on it instead, for saying where things stand: open the leg, or look at it on the home screen while it's under way. Two rows sit underneath the route, with a line beneath them saying how current the position shown is.
The top row moves the leg along. I've left appears from three hours before the scheduled departure and works without location access, since leaving only needs a time. I've arrived appears once the leg is under way and stays available even if it runs long, so a delayed arrival can still be marked when it happens. Undo steps back the last one if it was tapped by mistake. Either one updates the leg for everyone who can see it: progress starts moving on the trip and home screens, and arriving marks the leg done, the same as a tracked flight landing.
Once a leg is more than half an hour past when it was due and nothing has been marked, the buttons ask instead: "Arrived around 10:37 am?" (or "Left around…" if it hasn't reached its arrival time yet). Tap Yes to record that time, or Change time to open the Left at and Arrived at fields. If you tap I've left or I've arrived late, it asks when it happened instead of assuming "now": the time it was due, or Just now. That way a check-in you only remembered later doesn't make the leg look hours late.
Until something is recorded, a time that has passed reads Est departed or Est arrived, never "Departs" for a time already behind you.
To correct the times afterwards, edit the leg. Once it has started, the edit form has Left at and Arrived at fields with the times recorded so far. Change them to when it really happened and everyone on the leg sees the corrected times.
These buttons stand down once the leg is behind you. A leg you marked as arrived keeps Arrived and its Undo for three hours afterwards, which is the window for fixing a mistaken tap. A leg you never marked keeps I've left and I've arrived until a day after it was due to arrive — long enough for a journey that ran late, or one you only thought to close the next morning. After that the buttons go, and so does the row beneath them. The leg keeps its times either way: what it was scheduled for, and whatever actually happened, stay on the leg for everyone on it.
The row underneath appears once the leg is due and decides how much of your position gets shared:
- Share live turns on continuous sharing. Your position sets how far along the journey is and when you're due, for everyone who can see the leg. They see progress and an expected arrival, not your exact location. Drives and buses work out the arrival from the road ahead, with live traffic; trains and ferries work it out from how far you've come and how long that took.
- Update sends a single position and turns continuous sharing off, for anyone who would rather not have their phone tracked while they travel. It moves the card once and holds there until another position is sent.
- Stop takes the position back. It turns continuous sharing off, and after a single Update it withdraws that position too, so choosing to send one doesn't commit you to leaving it there.
Progress keeps moving toward the expected arrival even after the phone goes back in a pocket or the app is closed, so the card everyone else sees doesn't freeze while yours is put away.
An "Updated …" line on the card says how current the position behind it really is. It stays out of the way while things are fresh and appears once they aren't, so seeing nothing there means nothing is out of date. Sending a position counts as bringing the card up to date, so the line moves at the same moment the progress does.
Only one phone can share a leg at a time. If someone else already has it, the leg offers Take over in place of the usual row; tapping it claims sharing for your phone and leaves Share live or Update as the next choice. The other phone finds out the same way, by being offered Take over back.
If location access is off or was declined, Share live and Update show an amber outline. Tapping either one asks for access again, whatever the earlier answer was.
Share live turns amber on its own if the phone stops sending. Sharing only runs while the app is open on screen, so locking the phone or switching to something else pauses it, and a long drive with the phone away will pause partway through. Nothing is lost: opening the app again picks sharing straight back up, and the amber clears as soon as the next position comes through. Update never turns amber this way, because a single update is finished once it has been sent.
These buttons appear for whoever is actually on the leg: whoever added it, and anyone who has accepted an invitation to it. Flights that are tracked live don't show them, because their times arrive by themselves.
On your way to the airport or station
Before a flight, and before a train, bus or ferry is due, the leg offers On my way to the airport (or to the station, to the ferry, to the bus) instead. It shares the trip there rather than the leg itself: tapping it shares your position live, the same way Share live does, and everyone who can see the leg sees "Sam is on the way to Queenstown Airport" on it. They also get one signal saying so. Leaving home doesn't mark the leg as departed, and a flight's own times stay with the airline's live data.
While you're on the way, the leg works out when you'll get there from your position and the roads, the same way it does for a drive, and shows it to everyone ("Sam is on the way to Queenstown Airport, there about 6:52 pm"). If that's 15 minutes or more after you meant to be there, they get one signal saying so. For a flight, the time you meant to be there is the be-at-the-airport time from the night-before message; for anything else, it's when the leg leaves.
When you get there, it says so: "Sam is at Queenstown Airport", with one signal to the same people. It notices on its own once you're close (within about 2 km of an airport, which covers the car parks, or a few hundred metres of a station), or you can tap I'm at the airport (I'm at the station, I'm here). For a flight, your phone stops sharing there; the airline's live data has the flight from then on. For a train, bus or ferry, it keeps sharing from the platform and carries on into the leg.
It's on offer from five hours before a flight, and three hours before anything else. It's the same button on the travel day card on Home. It stops by itself when the flight leaves or reaches its departure time, and you can tap Stop at any point. For a train, bus or ferry it carries straight on into sharing that leg once it's due, so there's nothing to switch over. A drive doesn't have this step: it starts where you are, so I've left is the button there.
It isn't offered on a connecting leg. If an earlier flight of yours lands at the airport the next one leaves from, you're already there, so the next leg has no On my way button. That holds for any layover up to your layover threshold (Settings → Trips, 24 hours unless you've changed it). A longer gap is a stop rather than a layover, so the button comes back.
The night-before message carries an I'm on my way button too. Pressed before a leg leaves, it tells everyone you're on the way, but it can't send your position from the notification. Open the app and the leg offers Share live so people can follow along.
What can be read automatically
- Flights. The big airlines (BA, easyJet, Ryanair, Lufthansa, Delta, and so on) and the largest booking sites (Booking.com, Expedia).
- Trains. Trainline, SNCF, DB, Amtrak, and other major operators where the format is recognised.
- Rental cars. Hertz, Sixt, and most chain rentals.
- Ferries. The larger operators where the confirmation format is recognised.
Confirmations in a format that isn't recognised are read by an AI assistant instead, which takes a few seconds longer and handles almost any human-readable confirmation. If a confirmation can't be read at all, Connie says so in the conversation with a link to manual entry, and the original text is kept briefly so it can be pasted into the form without digging through the inbox.
After a leg is added
- The leg appears on the trip timeline at its scheduled departure time, in the origin's local timezone. Flights show airport names and terminals ("LHR T5 → JFK T8"); other modes show the equivalent: station names, pickup points, port names.
- The map location updates once the leg's expected arrival (delays included) has passed. Flights, trains, drives, and ferries all count.
Flights have one extra behaviour: from the day before departure onward, status refreshes periodically (gate, terminal, delays, cancellations), and changes raise signals when the Flight signals category is enabled (see Signals).
Which trip a booking joins
A forwarded or uploaded booking joins an existing trip when its dates fall inside that trip's, and starts a new one when they don't.
A trip's dates run from the first thing on it to the last, counted in whole days — flights, stays and events all count, and so do dates set by hand in Edit trip. Whole days is what makes the ordinary case work: a flight out on the 6th makes all of the 6th part of the trip, so a hotel checking in that evening joins it rather than starting something new.
A confirmation number outranks the dates. When a forwarded booking carries one that matches a trip already, it joins that trip whatever the dates say — on any trip you can edit, not only ones you own.
Where two trips both fit, the booking goes on the closest match and a signal says which other trip it also fitted, so a wrong guess is visible rather than silent. A booking that says where it is won't be matched to a trip on the other side of the world, however well the dates line up.
Travel documents are the exception. A visa or insurance policy is valid for months or years, so its dates say very little about which trip it belongs to; one is only filed against a trip when the match is unambiguous, and otherwise goes to your documents. A visa, eSIM, policy or pass then also goes on every other trip it covers, by country and dates (see Document items).
If a booking does land on its own, it can be moved: open it and use the option to add it to the trip it belongs to.
Multi-leg trips
Connecting legs show as a chain on the timeline: a multi-leg ticket for flights, a through-routed journey for trains, a sequence of segments for drives. Legs are grouped by the confirmation they arrived in. One confirmation with two flights becomes one chain; two separate confirmations become two chains, which can be linked manually if needed.
Two separate confirmations also stay two trips — an outbound and a return booked one-way each arrive a week apart with nothing between them. When they clearly form one journey, a signal offers to combine them: Combine puts everything on one trip, Leave them keeps them apart. It's worth combining early, because once they're one trip everything booked for the days in between lands on it.
The offer only appears where the shape is unmistakable — out to somewhere, and back from that same somewhere to where you started, within a couple of months. An onward one-way hop, or a return from a different city, is left alone. Nothing is ever combined automatically: combining moves everything onto one trip and can't be undone.
A gap above the layover threshold (default 24 hours) is treated as a stop rather than transit time, so a 36-hour gap in Dubai shows as a stop in Dubai. The same threshold applies to gaps between any travel legs.
A leg can also hold what you've booked along the way. Anything that starts and ends while you're on it, such as a motel each night of a two-day drive, shows under that leg with a label for how long you're travelling, for example "2 days on the road". A stay booked with dates but no check-in time counts as starting just before midnight on its first day and ending just after midnight on its last.