Trips

Jet-lag prep

When a trip crosses enough time zones, the change is turned into a day-by-day sleep and light plan: a gradual shift of the body clock in the days before flying, finished off after landing.

There's nothing to set up. It's on by default, stays quiet until a trip with a real time-zone shift gets close, and then shows a Jet lag prep card on the home screen.

The plan follows your body clock, not a single trip. Trips close enough together that you'd never settle back into your own routine in between are planned as one continuous stretch, so a second trip starts pulling while you're still away on the first — which is when that preparation has to happen. Once you've been home long enough to be back to normal, the next trip starts a fresh plan of its own.

Only travel that actually moves you between time zones counts, whether that's a flight, a train or a long drive. A hop within your own zone — Queenstown to Wellington, Sydney to Melbourne — is travel, but it isn't jet lag, so it never starts a plan and never holds an existing one open.

It plans from the journeys you're on, not from everything on a trip you can see. Being added to someone's trip for the wedding rather than the flights won't hand you their sleep schedule. Travel still in draft doesn't count either — nothing you haven't confirmed will set your alarms.

Each stretch of travel starts from wherever the last one left you, not from a fixed idea of home. Three weeks into a stay, the flight back is planned as a real shift from where you have been living — because by then, that is what your body is on.

From booking to body clock
YouAdd a trip that crosses enough time zones. That's the whole setup.
AutomaticA few days out, the Jet lag prep card appears with the day-by-day sleep and light plan.
AutomaticWind-down, lights-out, and wake cues arrive through signals, and through the calendar when merged in.
YouFollowing the nudges closes the gap between home night and destination night by about an hour a day.
AutomaticAfter landing, the plan finishes the shift using local daylight, then goes quiet.

The card

The card leads with the one thing to do right now: "Wind down a little earlier this evening," "Sleep hours," or, before the plan has started, "Jet lag prep for <city> starts tomorrow." An alarm chip on the same line shows the time to set for the next wake. Under it, one line gives the shape of the shift: how far the destination's clock is from yours and what time it is there, which way you're shifting, roughly how much a day, and the day you'll be aligned.

Once your schedule has caught up, the card says you’re aligned and the timeline stops there, marked where the two schedules meet — it only runs on if another leg would start shifting you again within your prep window. Coming home counts: once you’re back on your own clock the card says so, and then goes.

The card is shown for exactly as long as there is still an adjustment to make. Settle in somewhere for a few weeks and it steps aside for the middle of the stay, returning a few days before the journey home — there is nothing useful to say in between, and saying it anyway is just noise on your home screen.

Below that are two bars on a shared timeline:

  • You. The target sleep, wake, and wind-down for each night. A place label marks where the journey starts and updates as each destination is reached — every time on the card is the one a phone will show at that moment.
  • Goal. The place the plan is steering toward, with its local night. It hands over as soon as the plan starts steering somewhere new — a few days before you get there, not when you set off — so the last days of a stay already show the trip home as the goal, which is what your nights are bending toward by then. Brief layovers and connections don't count; only stops long enough to matter (the same rule the trip card uses).

The gap between the two night blocks is the jet lag, and it closes as the plan progresses. Amber marks wind-down, the dark blocks are sleep, and dates sit under each bar where a new day begins in that bar's own place. The range control shows 24, 36, or 48 hours, and the arrows step through the plan's days.

How the plan works

The plan shifts the body clock gradually, around an hour a day, in whichever direction re-syncs fastest (earlier for eastward trips, later for westward ones). It starts a few days before departure, holds the schedule steady on the flight, and finishes adjusting after arrival using the local daylight.

Trips with more than one stop are followed the whole way through. The plan leans toward the next place the traveller will actually spend time in — weighted by how soon they arrive and how long they stay — so a brief layover on the way to a longer stay is handled sensibly, and the target moves on to the next destination as it approaches. A return home is part of the same journey: as the trip back nears, the plan eases the body clock toward home time, so coming home needs no separate setup.

A short run-up doesn't make the plan harsher. It always moves at the same gentle pace and finishes more of the shift after landing. Following it day to day keeps things exactly where the plan expects; it never "catches up" suddenly.

When the wake time before an early departure lands in the middle of the night, the plan still gets the traveller up in time and suggests making up the sleep on the first leg.

On the days after landing it can also offer a short afternoon nap — but only when it's far enough from bedtime not to spoil the coming night. Napping doesn't suit everyone, so it can be turned off (see Naps work for you below), and then it's never suggested anywhere.

Reminders and the calendar

The plan's cues (wind down, lights out, wake, get bright light) can arrive through the usual Signals channels: in-app, push, and email.

They can also merge into the calendar feed as events with alarms. Turn on Jet-lag cues under Settings → Custom connections, in the Calendar feed section.

Settings

Everything lives under Settings → Trip preferences, in the Jet lag section.

  • Enabled. On by default. Turning it off hides the card and stops the reminders.
  • Typical wake window. Normal wake-up and bedtime. This is the clock the plan shifts from, so it's worth getting right.
  • Chronotype. Early bird, Typical, or Night owl. Early birds run a little ahead and night owls a little behind, which nudges when the light cues fire.
  • Non-flexible hours. A block that can't move (work, school). The plan bends around it rather than scheduling sleep through it. Clear either time to remove.
  • Only assist above. The smallest time-zone shift worth a plan. Below it, the plan stays silent (default 3 hours).
  • Awake before departure. How long to be up before setting off (default 3 hours). It applies to every departure — the trip home and any hop in between, not just the first one — and no bedtime is ever scheduled inside that window. For a late-night departure that means the evening stays clear and the night's sleep moves onto the journey itself.
  • Naps work for you. On by default. Some people can't nap, and for them a nap suggestion is advice they can't take and a calendar entry to delete. Turned off, no nap window is offered — not on the home card, not in reminders, not in the calendar feed — and the early-departure note stops mentioning one too.
  • Start prepping up to. How many days ahead the plan may begin (default 4). Bigger jumps finish adjusting after landing rather than starting even earlier, which is easier to stick to and about as effective.

The plan is personal. It's built from the account's own trip times and home time zone, and nobody else on a shared trip sees the jet-lag card or reminders.